WALL

Assembly

Before installing the load-bearing structure, a supply installation for the heating and cooling panels must be made. It is also necessary to plan and lay other installations that must be routed behind the load-bearing structure, e.g. electricity, sewage, etc.

After laying all the necessary installations, it is possible to proceed to the assembly of the supporting structure for the panels (frame).

Heating and cooling panels can be mounted on the load-bearing structure by means of: fastening with bolts to a steel structure (fig. 1), with bolts to a wooden structure (fig. 1), with clamps to a wooden structure (fig. 2), with clamps to gypsum and fibre panels (double sheeting) (fig. 3)

In the case of even surfaces, wooden or bricked, the panels can be fixed directly to the partition.

Glue the heating and cooling panels together to achieve a monolithic structure.