
SYSTEMKAN-therm
KAN‑therm TBS is a complete installation system, designed for the construction of underfloor and wall heating and cooling installations using the dry method. The main pipe anchoring element in System KAN‑therm TBS is a specially profiled foamed polystyrene board with metal lamellas.
The water underfloor heating based on system KAN‑therm TBS boards belongs to floor heating structures made in the dry system. The heating pipes are placed in specially profiled grooved insulation panels, and then covered with dry screed plates, with thickness depending on the designed utility load of the floor. Heat from the heating pipes is evenly distributed to the dry screed plates through the radiating steel lamellas placed in the board grooves
The technical details of System KAN‑therm TBS and the principles for its selection and installation are described in KAN‑therm Guidebook Surface Heating and Cooling.


System KAN-therm TBS is designed for wooden construction where the structure cannot be subjected to a high load of traditional concrete screed.

The construction made in System KAN-therm TBS is characterised by low height. Therefore, the system is often used for renovations or in heating and cooling wall installations made with the dry method.


The system installation is very easy and quick and can be done by one person.

The installation in System KAN-therm TBS can be started immediately after laying it. There is no need for time-consuming maintenance of the screed. Once the installation is laid, the final floor covering can be made.

Thanks to their pipe fastening method, TBS boards are ideal for sport floor heating installations with an air gap.